The principle, maintenance, applicability, and advantages of wall panel equipment

Wall panel equipment (innovative new wall panel equipment, new composite wall panel machine, lightweight composite wall panel equipment, wall panel equipment, new wall panel equipment) is a new type of large wall with excellent green, environmental protection, energy conservation, insulation, and fire resistance performance, which can be used in conjunction with domestic and foreign frame structures, steel structures, and special-shaped column structure systems.
Principle of wall panel equipment: The products produced by wall panel equipment have a wide range of raw materials and no regional restrictions. It is mainly made of sawdust, straw, rice husks, and various crop straw, and added with inorganic materials, processed through special processes. The wall panel equipment adopts double drive double roll extrusion technology, completing the production process of the product in one go from sizing, main material, spreading, lamination, and re pressing. The equipment has a high degree of automation, smooth operation, and specifications can be adjusted at will. The product surface is flat, smooth, and dense, achieving the industrial assembly line production of new building wall panels. It greatly reduces the labor intensity of production workers and changes many drawbacks of vertical and flat mold casting in the past.
Scope of application of wall panel equipment: mainly used for building wall insulation, building roof insulation system, steel plate roof insulation, ground insulation, warehouse insulation, road foundation, and can be widely used in many fields, such as refrigerated trucks, square flooring, airports, etc.
Wall panel equipment maintenance: 1. In addition to adding butter to the vibration guide rods of the wall panel equipment and conducting daily maintenance such as inspection, adjustment, cleaning, and refueling of relevant components on each shift, the following maintenance work should also be carried out regularly; According to the actual working time, the cumulative operating time is 1800 hours, so it is necessary to replace the lubricating oil in the gearbox once and clean the gearbox with kerosene or diesel before adding new oil. Regularly check the oil level of the gearbox, and if it approaches the lower limit, immediately raise it to the upper limit. 2. The vibrator of the wall panel equipment should be maintained in accordance with the following regulations: When handling and operating the vibrator, attention should be paid to preventing damage by knocking; The exterior of the casing should be kept clean to avoid obstructing the heat dissipation of the motor; If abnormal sound, vibration, or smell are found during the operation of the vibrator, the power should be immediately cut off and the machine should be shut down for inspection; Regularly inspect the wear of vulnerable parts such as bearings and oil seals, and replace them promptly if any problems are found. 3. During the squeezing operation of the wall panel equipment, if there is poor quality or a serious decrease in molding speed, stop the machine to inspect vulnerable parts such as the mixing knife, wall panel, and vibrating plate; When replacing the mixing knife, it should be replaced symmetrically to ensure uniform feeding. 4. Wall panel equipment should not be placed without leakage. When not in use for a long time, key parts should be coated with oil for protection. The four corners of the two front wheels and two rear wall panels should be in contact with the ground and placed horizontally to reduce deformation. 5. In addition to using and maintaining according to the provisions of this manual, users should also develop safety operating procedures for the extruder, implement quota operations, and ensure the normal operation of the extruder to produce qualified products.
Advantages of wall panel equipment: The production process of the composite insulation lightweight partition panel production line is simple, the equipment is highly automated, the labor intensity is low, the assembly line operation, and the production process is noise free and has no emissions of three wastes. The production line of insulated lightweight partition panels has low energy consumption and does not require high temperature and pressure. It utilizes chemical reactions to release heat, which meets the requirements of the production process.